| Product Id | Product Name | Product Description | Price Per Unit | Quantity
| |
|
| 1-T | Grinders - Pelletizers | Granutec Grinder | 1 | | |
|
| 1000 | ELEKTRA-FAURNDAU DRIVE | ELEKTRA-FAURNDAU DRIVE | 1 | | |
|
| 10000 | PULLER | PMC 2 BELT CLEATED PULLER | 1 | | |
|
| 10001 | PULLER | GATTO 207-3 PULLER | 1 | | |
|
| 10002 | PULLERS | PIPE PULLER 2-10" | 1 | | |
|
| 10006 | SPEEDEX PULLER | SPEEDEX HAULL OFF /PULLER Extruders and Extrusion plants SPEEDEX T1-H built in 1971 Status: in working order
| 1 | | |
|
| 1001 | MAAG MELT GEAR PUMP | MAAG MELT GEAR PUMP | 1 | | |
|
| 10018 | SICA PULLER | SICA 500mm Caterpillar/ haul-off TT4.50. 4 traks Build 5.1992 Pipe Diam. 500 mm Power: 5 KW | 1 | | |
|
| 1002 | MAAG MELT PUMP | MAAG MELT PUMP, 20 HP, TYPE 90-4-SP | 1 | | |
|
| 10023 | 4 Cleat puller | The length of the pads is 60", the width of the
pads is 5" and the entrance is 18". It has a 10 hp DC motor, it has DC
Controls. | 1 | | |
|
| 127T | AC Motors | A/C Motor - 60HP | 1 | | |
|
| 20003 | BATTENFELD PIPE SAW | BATTENFELD PLANETARY PIPE SAW RTA 250 for PP, PE, ABS, and PVC-PIPES up to 250 mm CUTTING and CHANFERING Typ: RTA 250 Year: 1985 Clamps: 4 sets The Saw is in very good working order | 1 | | |
|
| 20004 | VON HEIN PIPE-SAW | VON HEIN PIPE-SAW HTV 110 for PP, PE, PVC CUTTING and CHANFERING VON HEIN HTV 110 built in 1997 Status: in very good working order | 1 | | |
|
| 20005 | BATTENFELD SAW | BATTENFELD SAW RTA 250 for PP, PE, PVC-PIPES CUTTING and CHANFERING Typ: RTA 250, Year: 1984 PIPES DIAMETERS up to 250 mm Clamps: 9 setsThe Saw is in very good working order | 1 | | |
|
| 20006 | 20006 | SICA PLANETARY SAW TRS 32 � 250 for PVC und PE-PIPES CUTTING and CHANFERING Type: TRS 32 � 250 PIPES DIAMETERS from 32 up to 250 mm Clamps: 110 und 160 mm The Saw is overhauled and in very good working order built in 1993 - 7.5 kW | 1 | | |
|
| 20007 | RONOCOMATIC | RONOCOMATIC IN LINE EXTRUSION PART CUTTER, 14 WIDE WITH SEVERAL CUTTER ROLLS | 1 | | |
|
| 20012 | GOODMAN CUTTER | GOODMAN CUTTER 12" & RONCO SLITTER | 1 | | |
|
| 20013 | GOODMAN FLY CUTTER | GOODMAN & SON FLY CUTTER, RANGE 1/4" - 2" S/N: 6553 | 1 | | |
|
| 20014 | GOODMAN FLY CUTTER | GOODMAN & SON FLY CUTTER, RANGE 1/4" - 4" S/N: 6289 | 1 | | |
|
| 20015 | GOODMAN FLY CUTTER | GOODMAN & SON FLY CUTTER, RANGE 1/4" - 2" - S/N: 6883 | 1 | | |
|
| 20016 | BOSTON MATHEWS FLY CUTTER | BOSTON MATHEWS FLY CUTTER, RANGE 1/4" - 2" - S/N: 5454 | 1 | | |
|
| 20018 | SPEEDEX PIPE CUTTER | SPEEDEX 630, PIPE CUTTER UP TO 24" | 1 | | |
|
| 2002 | INGERSOLL RAND COMPRESSOR | Ingersoll Rand 100 HP single stage, contact cooled rotary compressor –
Model SSR EP100. 60 HZ, INCLUDES DRYER, MAKE OFFER | 1 | | |
|
| 20021 | GATTO UPCUT SAW | CONAIR GATTO UPCUT SAW MODEL UC-4-18, A992, 16" BLADE | 1 | | |
|
| 20022 | SICA SAW | SICA SAW 800 FOR PIPE 200 MM - 800 MM, 1994 - NEWLY OVERHAULED | 1 | | |
|
| 20023 | SICA SAW | SICA SAW 400 FOR PIPE 110 MM - 400 MM, 1994 - NEWLY OVERHAULED | 1 | | |
|
|
|
|
|
|
| 3001 | AMERITHERM | AMERITHERM HEATING POWER SUPPLY TRANS. & CHILLER | 1 | | |
|
|
|
|
| 3002 | CHILL 3 ROLLSTACK | CHILL 3 ROLLSTACK FOR COOLING POLYMER | 1 | | |
|
| 3006 | AEC CHILLER | AEC (Advantage engineering)
10 Ton AEC Chiller
Model: NXGW-10 / Year: 1998
Water Cooled
10 Hp Compressor
460 Volts, 3 Phase
60 Hz, 10 Hp process Pump, 1/2 Hp Recirculation Pump, 30F Min. Temp / 65F Max. Temp | 1 | | |
|
| 3008 | THERMAL CARE CHILLER | Thermalcare Chiller 70 ton, mod TSW 70, with multiple compresors, 2 independant refrigeracion circuits, PLC, Allen Bradley, includes valve regulators and condensors | 1 | | |
|
| 3009 | 210 TON CARRIER CHILLER | 210 tons (modular and expandable) Chiller
Ref plus free chill unit
Plate / frame heat exchanger
Pressure filtration
High end process and return pumps
All controls included
460 v | 1 | | |
|
| 3010 | AEC COOL TOWER | AEC COOL TOWER, MODEL PS50, 50 TON, 5 hp | 1 | | |
|
| 3011 | AMERITHERM CHILLER | AMERITHERM 1 TON CHILLER, AIR COOLED | 1 | | |
|
|
|
|
|
| 374T | Printers | Tubing printer | 1 | | |
|
| 376T | Grinders - Pelletizers | 200 HP Pulverizer | 1 | | |
|
| 377T | Saws/Cutters | Goodman Cutter | 1 | | |
|
|
| 387T | Feeders and Receiving Hoppers | Conair Hoppers | 1 | | |
|
|
|
| 4000 | Dryers/Blenders | PLASTIC PROCESS EQUIPMENT DRYERS | 1 | | |
|
| 40004 | DIE HEAD | PVC PIPE HEAD 500 with 1 color strip and Heaters for mal-wall thickness control Year 1993 with Heaters With Trolley 3 sets of Pipe Tools/ Inserts: 315, 400 and 500mm with Heaters for Thermal centering Status: very good EXWORKS eur 42,000.00
| 1 | | |
|
| 40005 | DIE CLEANER | PROCEDYNE DIE CLEANER MOD. 103015,
12 x 20 x 16 | 1 | | |
|
| 40007 | PVC PIPE HEAD | NEW G+G PVC PIPE HEAD 315
New insert 315x9,2mm
Status: like new
Year of construction: 2009
Operating hours:00:00 h | 1 | | |
|
| 40009 | ALLIED DIES SHEET DIE | ALLIED DIES 97 INCH SHEET DIE FOR EXTRUDER | 1 | | |
|
| 4003 | MATERIAL DRYER | MATERIAL DRYER - CHR.STOUGAARD/MOTAN CHR. STOUGGARD/MOTAN CS 4, 12.0 kw | 1 | | |
|
| 4004 | SILO DRY AIR DRYER | SILO DRY AIR DRYER KELLER I & TESCH ST 500, 1992 | 1 | | |
|
| 4005 | GAVEMETRIC K-TRON | K-TRON SODER K2G GRAVIMETRIC 4 COMPONENTS DOSER-STATION
built in 1999
Comp. 1 Screw diameter 45 mm
Comp. 2 Screw diameter 35 mm
Comp. 3 Screw diameter 35 mm
Comp. 4 Screw diameter 20 mm
Throughput approx. 800 kg/h | 1 | | |
|
| 4006 | CONTINUOUS-HOPPER-DRYER | LABOTECK CD 350 CONTINUOUS-HOPPER-DRYER
LABOTECK CD 350
built in 1995 - 12.5 kW | 1 | | |
|
| 4024 | PPE DRYER | PPE PLASTIC PROCESS DRYER, MODEL P161 | 1 | | |
|
| 4025 | NOVATEC DRYER | NOVATEC DRYER, MODEL MPC-1000, 1000 CFM | 1 | | |
|
| 4026 | CONAIR BLENDER | CONAIR BLENDER, MODEL GBH-22, GAVIMETRIC, 4 MATERIAL | 1 | | |
|
| 411C | Air Compressors | Ingersol Rand 75HP compressor | 1 | | |
|
| 412C | Air Compressors | Ingersol Rand 100HP compressor | 1 | | |
|
| 413C | Air Compressors | 100 HP Compressor | 1 | | |
|
|
| 41A | Sheet Dies | 66 INCH FLEX LIP DIE WITH RESTRICTOR BAR - USED. | 1 | | |
|
| 421C | Puller | Conair tire puller | 1 | | |
|
| 422C | Puller | Speedex Cutter | 1 | | |
|
| 423C | Puller | OEM tire puller | 1 | | |
|
| 424C | Saws/Cutters | Gatto fly knife cutter | 1 | | |
|
| 426C | Saws/Cutters | Gatto CS-7 Saw | 1 | | |
|
| 427C | Printers | Gnata Hot stamp printer | 1 | | |
|
| 428C | Extruder Parts/Related Items | Maplan RK3 die | 1 | | |
|
| 429C | Extruder Parts/Related Items | Midwest 150 dies | 1 | | |
|
| 430C | Grinders - Pelletizers | Cumberland 50HP grinder | 1 | | |
|
| 431C | Extruder Parts/Related Items | Sica pipe stacker | 1 | | |
|
| 432C | Extruder Parts/Related Items | Dock leveler | 1 | | |
|
|
| 434F | Saws/Cutters | Emory Saw | 1 | | |
|
|
| 47C | Puller | Milacron 2 belt puller | 1 | | |
|
| 49C | Vacuum Tanks/Water Tables | Gatto Vaccuum tank | 1 | | |
|
| 50002 | MAGME CO-EXTRUDER | MAGME CO-EXTRUDER 1-18DE-25:D STA MAGME GA 18DE-25:D STA built in 2000 - 5.0 kW Screw diameter 18mm WORKING /h.: Approx. 320 h Lab. Extruder The Extruder is in very good condition, Like new | 1 | | |
|
| 50003 | REIFENHAUSER CO-EXTRUDER | CO-EXTRUDER REIFENH�USER RH 27-1-25-25 D PP, PE Co-Extruder built in 1994 - 4.1 kW Type: RH 27-1-25-25 Build in:1994 Screw diameter 25mm The Extruder is in very good condition | 1 | | |
|
| 50006 | CM45 EXTRUDER | CINCINNATI CM 45 TWIN EXTRUDER WITH SCREWS & BARREL | 1 | | |
|
| 50007 | CM45 PIPE EXTRUSION | CM 45 PVC PIPE EXTRUSION LINE UP TO 2" DIAMETER | 1 | | |
|
| 50008 | CM 80 EXTRUDER | CM-80 new in 2001 s/n E54A0297008 hours on machine 18,045 fully rebuilt tungsten screws by Wear Tech installed about 200 hours ago or approximately 70,000 lb’s ago they are considered as new | 1 | | |
|
| 50010 | CM DELIVERY ENHANCEMENT | CINCINNATI MILACRON DELIVERY ENHANCEMENT EXTRUDER FOR TOP OF CM92 TO INCREASE THROUGH PUT. | 1 | | |
|
| 50017 | CINCINNATI MILACRON | CM 55 CINCINNATI MILACRON TWIN EXTRUDER | 1 | | |
|
| 5011 | REIFENHAUSER | REIFENHAUSER 801-1-90-30 WE SINGLES SCREW With PP-PE PIPE-SCREW With GROOVES BUSH built in 1997 - 132.0 kW Output approx. 450 kg/h Status: Reconditioned | 1 | | |
|
| 5019 | DOLCI CO-EXTRUSION LINE | FOR LDPE, LLDPE, MDPE, MAX. FILM WIDTH 14.000 mm , OUTPUT CAPACITY: 800 KG / H, 2 EXTRUDERS, 2 LAYERS Production of Agricultural film , Dolci 120, L/D 30, and Motor in CC 275 KW, one of those was rebuilt in 1991 | 1 | | |
|
| 5033 | Royal Rubber Extruder | Royal Rubber Extruder, 3 1/2" | 1 | | |
|
| 5037 | Bekum H111 | BEKUM H111 FULLY REBUILT, NEW CONTROL PANEL, NEW PLC, FULLY REBUILT HYDRAULICS, FULLY REBUILT AND NEW INSTALLED PNEUMATIC SYSTEM, MECHANICALLY REBUILT, NEW BUSHINGS AND FRONT REBUILT, 60MM BIMETALIC BARREL | 1 | | |
|
| 5044 | KMD EXTRUDER | Krauss Maffei KMD 130-26 PVC pipe extruders. These extruders include the frame, gearbox, barrel with barrel heat bands, twin screws, oil blocks, and the barrel to head adapter.
Does not include the electrics, the barrel cooling, or the vacuum venting pump. 1999 | 1 | | |
|
| 5045 | KMD EXTRUDER | Krauss Maffei KMD 130-26 PVC pipe extruders. These extruders include the frame, gearbox, barrel with barrel heat bands, twin screws, oil blocks, and the barrel to head adapter.
Does not include the electrics, the barrel cooling, or the vacuum venting pump. 2000 | 1 | | |
|
| 5046 | STERLING CO-EXTRUSION LINE | USED 40” WIDE STERLING CO-EXTRUSION SHEET LINE, RECONDITIONED IN 1998-2000 TO PRODUCE SYNTHETIC PAPER | 1 | | |
|
| 5048 | BEKUM H111 | New PLC control installed- Omron touch screen Rebuilt 60mm Extruder AC extruder motor – with vector drive AC | 1 | | |
|
| 5049 | JOMAR 65 T | JOMAR EXTRUDER BLOWMOLDING MACHINE - SPOTLEES - JUST DISCONNECTED FROM PRODUCTION | 1 | | |
|
| 5050 | FISHER 054-1 | Still under power
Fully upgraded hydraulics- mold open/close upgraded to hydraulic direct acting cylinders
Mako6 control - option to be upgraded to new Omron Controller with touch screen before shipping if wanted Solid machine | 1 | | |
|
| 5051 | CENTURY EXTRUDER | Century Extruder’s 30MM Ring Extruder
Mfg 2006
S/N: 1220005X
42:1 L/D Nitrided Barrel Oil Headed
Explosion Proof – Class 1 Div. 2 Group C&D 50Hp WEG – Rockwell Automation GV6000 Drive Kissling Gearbox: RE3 1.9:1Ratio Producing 800 RPM
12 Screw Shaft’s Planetary Design | 1 | | |
|
| 5054 | WAYNE YELLOW JACKET EXTRUDER | Wayne 1" Yellow Jacket extruder. This is a 1" extruder, 24:1 L/D, 3hp DC, runs on single phase power, fan cooled, chrome screw. This machine is in excellent operating condition, plug in and run. Comes with FACTORY WAYNE SMALL TUBING DIE and factory Wayne stand | 1 | | |
|
| 5055 | DAVIS STD. EXTRUDER | 4 1/2" DAVIS STANDARD EXTRUDER, 40:1 L/D, 200 HP, VENTED, WATER COOLED, EXCELLENT CONDITION | 1 | | |
|
| 5056 | GLOUCESTER EXTRUDER | 4 1/2" GLOUCESTER EXTRUDER, 32:1 L/D, 200 HP, VENTED | 1 | | |
|
| 5057 | AKRON EXTRUDER | 1" AKRON EXTRUDER, 24:1 | 1 | | |
|
| 5058 | QUEENS BLOWN FILM LINE | 36" QUEENS HD / LD BLOWN FILM LINE with 2 color inline printer, tower, nip and treater. Mfd in 1997. Electrically upgraded in 2009. Main Motor is 40 HP with 70 mm screw, Tower and two color inline,Will produce HD and LD films. | 1 | | |
|
|
| 55T | AC Motors | A/C Motor - 2HP | 1 | | |
|
| 6-T | Grinders - Pelletizers | POLYMER 5hp GRINDER | 1 | | |
|
| 60000 | BATTENFELD COOLING TANK | BATTENFELD 200 VACUUM-CALIBRATOR-TANK and 2 COOLING-TANKS 200 Extruders and Extrusion plants BATTENFELD built in 1986 Status: Reconditioned | 1 | | |
|
| 600006 | DRUMWINDER | DRUMWINDER/COILER CALINI Drum 2000 1 DRUM WINDER/COILER for PIPES 32 PIPES Drums, 4 Winding trolleys Automatic start coiling and guiding year:2004 working hours: 600 like new, Winding speed 40m/min BUILT IN 2004 | 1 | | |
|
| 600007 | CALIBRATOR SLEEVE | 2 ADJUSTABLE CALIBRATOR SLEEVE for PVC-PIPES DIAMETER: 110mm, 125mm | 1 | | |
|
| 600008 | VETTER CABLE | VETTER CABLE and PIPE DRUM-WINDER VETTER KTU 6-ST-S built in 1993 - 1.1 kW Payload without accessories: 6000kg Cable drum D, Max 3000mm Cable drum D, min 900mm Hydraulic lifting: Hub 450mm Max Winder in good working order | 1 | | |
|
| 600009 | Ultrasonic Scanner | Ultrasonic Scanner INOEX IPC Compact AFS 91-110 INOEX AFS 91-110 built in 1994 Measurement of wall thickness with circle display Compact pipes up to � 110 mm Automatic ultrasonic calibration with gravimetrics Weight per meter controller haul-off Adapter for connection of scanner to vacuum bath | 1 | | |
|
| 60001 | KUAG TANK | COOLING SPRAY TANK KUAG SB 250/6m Extrusion down stream equipment KUAG SB-250 / 6 built in 1994 Status: Reconditioned | 1 | | |
|
| 600010 | PUNCH PRESS | PUNCH PRESS ME 52 / 2H built in 1987 | 1 | | |
|
| 600011 | Ultrasonic Scanner | Ultrasonic Scanner INOEX 90KB-06-G up to � 250mm built in 1995 Measurement of wall thickness with circle display Compact pipes up to � 250 mm Automatic ultrasonic calibration with gravimetric Weight per meter controller haul-off Ultrasonic Scanner stand alone | 1 | | |
|
| 600012 | INJECTION MOLD | INJECTION MOLD PP JunctionDN 70X50/45 RAMIX DN 70X50/45 built in 1997 | 1 | | |
|
| 600013 | CALIBRATOR SLEEVE | CALIBRATOR SLEEVE for PVC-PIPES 500 mm Extruders and Extrusion plants SANDER 500 mm PVC | 1 | | |
|
| 600014 | CIRCULAR LOOMS | HAO-YU LOOMS 30cm-80cm CIRCULAR BAGS, YEAR 2008, INSTALLED IN 2009 | 1 | | |
|
| 600015 | COMPOUND PLANT | COMPOUND PLANT COMPLETE WITH SCALES, LOTS OF EXTRAS INCLUDING NEW MIXING BOWL | 1 | | |
|
|
| 60002 | ROLLEPAAL TANKS | 2 ROLLEPAAL VACUUM AND CALIBRATOR TANKS 1 u. 2 CHAMBERS und 3 COOLING-SPRAY-TANKS 6 m 250 For PVC or PE-pipes up to 250 mm With electrical feed on rails Water filters with Bypass 1 ROLLEPAAL VACUUMTANK 2 CHAMBERS 1m+5m RSV8 2K- 6m 250 1 ROLLEPAAL VACUUMTANK 1 CHAMBERS 6m RSV8 1K- 6m 250 3 COOLING-SPRAY-TANKS RSS 16- 6m 250 STATUS: Like NEW built in 2006 | 1 | | |
|
| 600024 | CNC LATHE | JONES & LAMSON CNC LATHE, MODEL 4512 COMBI WITH GE FANUC CONTROLS, 6 STATION TURRET, EXCELLENT CONDITION | 1 | | |
|
| 600029 | SILOS | (2) 14'8" DIA. x 44 x 175,980 CAPACITY (2) 11'6" DIA x 44' x 110,335 CAPACITY | 1 | | |
|
| 60003 | ROLLEPAAL TANKS | ROLLEPAAL VACUUM AND CALIBRATOR TANKS 1 and 2 CHAMBERS and 3 COOLING-SPRAY-TANKS ANKS 6 m 400 For PVC or PE-pipes up to 400 mm With electrical feed on rails Water filters with Bypass 1 ROLLEPAAL VACUUMTANK 2 CHAMBERS 1m+5m RSV16 2K- 6m 400 1 ROLLEPAAL VACUUMTANK 1 CHAMBERS 6m RSV16 1K- 6m 400250 3 COOLINGTANK RSC 16- 6m 400 ROLLEPAAL RSV 16 2K-6M built in 2007 STATUS: NEW | 1 | | |
|
| 600031 | MATERIAL BIN | ENSIGN MATERIAL BIN 48" x 48" | 1 | | |
|
| 600033 | MATERIAL BIN | NBE MATERIAL BIN 48" X 48" | 1 | | |
|
| 600034 | FILM AND SHEETER | FILM AND SHEETER 48" | 1 | | |
|
| 600040 | STARLINGER LOOMS | CIRCULAR STARLINGER LOOMS FOR BAGS, 30 - 80 mm, (2) MOD. HDL4, 1991, (14) MOD. HDE4, 1993, (7) MOD HDE4, 1994 | 1 | | |
|
| 600041 | PIPE HEAD | MIDWEST PIPE HEAD WITH CART, MW 500XL FOR SCHEDULE 40 PIPE 6" - 24", INCLUDES CART, PINS, AND BUSHINGS, GOOD CONDITION, READY TO RUN
| 1 | | |
|
| 600046 | WATER TANKS | 18" SPRAYS 20 FOOTER, AS-IS | 1 | | |
|
| 600050 | WAYNE SHEET STAND | WAYNE SHEET STAND, 8 1/2" WIDE, 6" DIAMETER | 1 | | |
|
| 600051 | MACBETH SPECTRA LIGHT | MACBETH SPECTRA LIGHT II | 1 | | |
|
| 6001 | GEAR PUMP | PSI ECTRUSION GEAR PUMP, 3 1/2" | 1 | | |
|
| 60013 | CONAIR VACUUM PUMP | CONAIR VACUUM PUMP, 3 HP | 1 | | |
|
| 60015 | CONAIR VACUUM PUMP | CONAIR VACUUM PUMP, 1 HP, WITH FILTER, MOD. SPP | 1 | | |
|
| 60023 | NOVATEC VACUUM PUMP | NOVATEC VACUUM PUMP, MODEL VH3, 3 HP | 1 | | |
|
| 60024 | VACUUM RECEIVER | THOR McCOSH VACUUM RECEIVER, 24 STATION | 1 | | |
|
| 60025 | VACUUM RECEIVER | CONAIR VACUUM RECIEVER DL-15 | 1 | | |
|
| 60026 | VACUUM RECEIVER | CONAIR VACUUM RECEIVER FL-15 | 1 | | |
|
|
|
| 7002 | CONAIR DRYING HOPPER | CONAIR DRYING HOPPER 300 LBS | 1 | | |
|
| 7003 | WHITLOCK HOPPER | WHITLOCK DRYING HOPPER 300 LBS | 1 | | |
|
|
| 7004 | UNA-DYN HOPPER | UNA-DYN DRYING HOPPER, 400 LBS | 1 | | |
|
| 8-T | Grinders - Pelletizers | Nelmor 15HP Grinder | 1 | | |
|
| 80000 | BEKUM H111/S62 | BEKUM MOD. H111/S62, FULLY REBUILT IN 2008, NEW CONTROL PANEL WITH PLC INSTALLED, TOUCH SCREEN, NEW PUMP AND ACCUMULATOR, FULLY REBUILT HYDRAULIC VALVES, PNEUMATICS FULLY REBUILT, NEW SMC VALVES, BIMETALLIC SCREEW AND BARREL PE OVERHAULED - COULD BE REPLACED WITH PVC, DUAL SPEED BEKUM EXTRUDER GEAR BOX, AC VECTOR DRICE, AC MOTOR 40 HP, COMES WITH SWING KNIFE. | 1 | | |
|
| 80001 | BEKUM | BEKUM MODEL H1111, FULLY REBUILT IN 2009, NEW CONTROL PANEL W/PLC INSTALLED, TOUCH SCREEN, HYDRAULICS, FULLY REBUILT VALVES, NEW PUMP AND ACCUMULATOR, PNEUMATICS- FULLY REBUILT, NEW SMC VALVES, 60 MM BIMETALLIC SCREW AND BARREL OVERHAULED, COMES WITH SWING KNIFE | 1 | | |
|
| 80002 | BEKUM 151 | BEKUM MOD. 151 FULLY REBUILT IN 2007, EXCELLENT CONDITION, IN PRODUCTION, SINGLE HEAD, MOLD HT: 300MM, HAS PLATES TO REDUCE TO 260MM IF NEEDED, MAX. CLAMP OPENING 560 MM, MEW CONTROL PANEL WITH OMRON PLC-TOUCH SCREEN-FULL OUTPUT PROTECTION-NEW WIRING, HYDRAULICS- FULLY REBUILT VALVES NEW PUMP AND ACCUMULATOR, RATED UP TO 4000 psi FOR HIGH TONAGE, 90 MM SCREW AND BARREL OVERHAULED-DUAL SPEED BEKUM EXTRUDER GEARBOX-AC VECTOR DRIVE-AC MOTOR 75HP, COMES WITH PRESQUEEZE SWING KNIFE
| 1 | | |
|
| 80003 | BEKUM BAE2 | BEKUM BAE2, 1985 (APPROX), 60MM SCREW, EXTRUDER DRIVE 10HP WITH INVERTER, GENERAL ELECTRIC INVERTER-OMRON CONTROLS-NT11S OMRON SCREEN- HEAD 100MM CENTER WITH DOUBLE HEAD-600VAC-TRANSFORMERS FOR HEAT POWER ATTACHED-SINGLE STATION MACHINE-CAN PRODUCE UP TO 2 LITRES OF BOTTLES DEPENDENT ON SIZE AND CONFIGURATION OF MOLD | 1 | | |
|
| 8001 | TEMPEK GRANULATOR | TEMPEK GRANULATOR 1010 EM - 7.5 HP - 10" x 10" OPENING - NOISE PROTECTION | 1 | | |
|
| 8008 | CONAIR GRANULATOR | CONAIR GRANULATOR 8" x 14", 7 1/2" HP, MOD. CF814 | 1 | | |
|
| 8017 | CUMBERLAND GRINDER | CUMBERLAND GRINDER MOD 24, 75 HP, 24" x 15" | 1 | | |
|
| 8018 | CUMBERLAND GRANULATOR | CUMBERLAND GRANULATOR,14"x20", 20 HP WITH BLOWER | 1 | | |
|
| 8020 | COLORTRONIC GRINDER | COLORTRONIC GRINDER, MODEL M102, 3 HP | 1 | | |
|
| 9000 | PRINTERS | MATHEWS PIPE PRINTER HEADS | 1 | | |
|
| 9003 | VANDAM CUP PRINTER | RECTANGULAR CUP PRINTER & 1 COLOUR BASE PRINTER, VAN DAM MODEL # 565 AA-PT, 1993, # OF COLOURS 6, CUP SIZE TOP 100MM x 150 MM,CONICITY MAX. 10 DEGREES, CUP HIEGHT 80 MM,PRINT LENGTH 343MM, SPPED 8000/5000/HR DEPENDS ON PRODUCT TO BE PRINTED | 1 | | |
|
|
